Below is a snippet that shows how to use the function for a digital start trigger coming in on PFI0 and looking for a rising edge on that line. A code snippet of its use follows to read samples from a single channel. Analog output channels— AOChannel class. Once a task has been cleared, it cannot be used unless it is recreated. NET library cannot be instantiated directly.

Uploader: Dairn
Date Added: 1 May 2011
File Size: 13.6 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 91236
Price: Free* [*Free Regsitration Required]

When a task is not specified, the function creates a task. Digital output channels— DOChannel class. If you are upgrading an existing system, NI recommends that you back up any applications, projects, or other related files before continuing.

The snippet above configures the device to look on PFI 0 for a rising digital edge trigger. When using the NI-DAQmx Trigger function, all valid trigger signals are available as the source input to the function.

Before you begin using your DAQ software, you must install your application development environment first, and then your lbview software. Below is a snippet that shows how to use the function for a digital start trigger coming in on PFI0 and looking for a rising edge on that line.

For finite acquisitions, by specifying a number of samples per channel of -1, the function waits for all of the requested samples to be labvew and then reads these samples.

Getting Started with NI-DAQmx: Main Page

Rate this document Select a Rating 1 – Poor 2 3 4 5 – Excellent. Analog input channels— AIChannel class. NET library cannot be instantiated directly.


Attribute [CVI] Property [.

NI-DAQmx Download – National Instruments

Then call a method on the reader class to read the data, as shown in the following snippet:. Additionally, analog input, analog output, and counter operations use minimum value and maximum value inputs to configure and optimize the measurements and generations based on the minimum and maximum expected values of the signals.

If the task is currently running, the function first stops the task and then releases all of its resources. For example, an input is required to specify the physical channels analog input and analog outputlines digitalor counter that the virtual channel s will use. Please take a moment to register your NI products to receive:.

NI recommends the Typical Installation to ensure that all dependent software is installed. For example, in the following NI-DAQmx Trigger VI, the start trigger signal for Device 2 is available as the source of the start trigger for Device 1 without any explicit routing being performed.

After rebooting your computer or adding new hardware to your system, you may see the NI Product Registration Wizard appear.

Getting Started with NI-DAQmx: Main Page – National Instruments

This state model consists of five states in which a task can reside. NI-DAQmx automatically performs this routing. It is intended for both the beginner who labvieew to learn how to use the DAQ Assistant, as well as the experienced user who wishes to take advantage of advanced NI-DAQmx functionality. NI-DAQmx also automatically performs this routing. Both of these triggers can be configured to occur on a digital edge, an analog edge, or when an analog signal enters or leaves a window.


This includes specifying whether the operation will be continuous or finite, selecting lbview number of samples to acquire or generate for finite operations, and creating a buffer when needed.

Below is a snippet of how to use the two functions:. NI-DAQmx Properties provide access to all of the properties associated with a daqmmx acquisition operation.

To get an instance of the DaqStream class that corresponds to a particular Taskuse the Stream property. It also greatly simplifies programming such applications. An NI-DAQmx virtual channel consists of a physical channel on a DAQ device and the configuration information for this physical channel, such as input range and custom scaling.

Please take a moment to register your NI products to receive: Dasmx, the source of the sample clock is read.

This tool helps you create your applications without programming through albview graphical interface for configuring both simple and complex data acquisition tasks. This level of performance is possible because of memory-mapped registers.