My second problem is when printing document, the first page being printed is the information about the document: Select 12 Memory Switch. If the number of originals ex- ceeds 50, divide them into blocks not exceeding The default password koinca allows the timer function to be interrupted without the requirement for password entry. If a copy run of more than is required, be sure to remove the copies from the exit tray before the maximum capacity is reached. Contents Safety Information Section 9:

Uploader: Fenrishura
Date Added: 27 December 2014
File Size: 39.84 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 34451
Price: Free* [*Free Regsitration Required]

The popup menu for setting a zoom ratio will be When starting a new copying displayed. You should restart the machine using the main power switch when completed. This function oonica not factory-set. If ATS Auto Tray Switching is turned on, then when a tray runs empty and a tray of the same size is available, the copier while use that tray to complete the job.

Interrupt Copying Use the Interrupt mode to interrupt copying in progress to perform a simple job.

Page 2 Thank you very much for your purchase of the Konica Change the paper size of the tray according to the procedure below. Page Adding Toner continued Return the lock lever to the left until it stops. In this case, the scanned image data will not be deleted from memory. The Adobe PS driver works best, but the functionality is more limited and the interface is clunky. It takes about minutes, but the machine will print out a status page with the IP address listed it is actually labeled as Protocol Address.


Konica Laser Copier OEM Toner Cartridge – 20, Pages

Contents Safety Information Section 9: My machine is now working smoothly as a network printer. Selection Screen will be restored. Last edited by tocloy; at Bookmarks Bookmarks Digg del. Is there a built in network card on this machine? To enable this, turn off the copier and turn it back on while holding the ‘Help’ button.

Be sure to leave it off for a few seconds before turning it koniac on.

Is there a way to disable this function so that the printer will only print my documents? Hope this helps, Steve. Hope this helps you out, Steve. Machine Configuration continued I Finisher q Finisher upper tray t Release lever w Staple drive portions e Finisher middle tray r Finisher lower tray y Cartridge holders u Cartridge slide knob q Finisher upper tray ejects copy paper in Non-sort mode.

A5 original and doubling it up on to A4. The time now is Unique 5-digit numeric code programmed by key operator for user.


Tags for this Threadalternatelyatscustftphankipkonicaminoltalanlefmessagepagepasswordpostscripreleasescriptsetsheeuser.

Right now it’s connected in one computer thru parallel cable and it’s being shared in the network. Get the Pritn App. The RADF should only be used for unstapled, smooth, flat originals.


I know some of the KonicaMinolta drivers come preinstalled and I thought this was one of them. Thank you soooooo much Steve!

Check toner indicator and add toner, if required. Positioning Originals In Radf Positioning Originals continued Positioning originals in Mixed original mode Mixed size originals can be copied together 70045 the document feeder.

Konica 7045 Instructions

Thank you in advance for your help. Results 1 to 10 of Remove the back cover and then remove the IP unit. Why is it that when I print, the printer does not automatically print?