Always install the latest OS version and corresponding updates to maximize the features of your hardware. These connectors are set to Standard IDE configuration by default. Anti-virus Utility Installs the anti-virus program. This will decrease the time needed to boot the system. Specifications and features vary by model, and all images are illustrative. The system then runs the power-on self tests or POST. The contents of the support CD are subject to change at any time without notice.

Uploader: Mugore
Date Added: 26 June 2004
File Size: 24.97 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 74746
Price: Free* [*Free Regsitration Required]

It’s a community-based project which helps to repair anything.

Install the necessary drivers to p5vd1- the devices. The USB module is purchased separately. Setup will ask shortly whether you would like to install addition drivers. From the left window pane, select the folder that contains the p5vd1-xx you intend to use as your boot logo. Push each of the pins downward to secure the heatsink and fan assembly in place. Disconnect all hard drives except the SATA drive that you want to install.

SATA= WD 74GB into a MOBO Asus P5VD1-X

Use of two new identical hard disk drives is required for this p5vd1. System power After applying power, the system power LED on the system front panel case lights up. Connect the chassis power LED cable to this connector.


After making all the connections, replace the system case cover. Even if you are not p5cd1-x to use the Setup program, you can change the configuration of your computer in the future.

Refer to the CPU documentation for details. The speaker allows you to hear system beeps and warnings.

Hardware monitoring errors can occur if you fail to plug this connector. It will say to press “F6” at that point. Doing so can cause system boot failure! View the online help for detailed information. Pin 5 on the connector is removed to prevent incorrect cable connection when using an FDD cable with a covered Pin 5.

I’m almost giving up The following inquiry appears: Load Setup Defaults This option allows you to load the default values for each of the parameters on the Setup menus. This PSU type has pin and 4-pin power plugs. If you want to auto-configure, proceed to the next step, otherwise, skip to step 5.


Follow the instructions in Chapter 4.

SATA= WD 74GB into a MOBO Asus P5VD1-X – Ars Technica OpenForum

Refer to the connector description below for details. The following sub-sections describe the slots and the expansion cards that they support. Discard Changes This option allows you to discard the selections you made and restore the previously saved values.

Replace the system cover. Should I change that installed.

Follow these steps to install the CPU heatsink and fan. Tips and additional information to help you complete a task.

Turn on the system. Microcode Updation [Enabled] Disables or enables the microcode updation function. Before you start installing the motherboard, and hardware devices on it, check the p5vs1-x in your package with the list below. Originally posted by softcris: