If it doesn’t work, try flipping around the PC speaker connector, you might’ve connected it wrong. The nature of SATA is one device per channel. If you’re still having problems, you might need a stronger PSU or you can try connecting your devices to an USB hub with its own power supply. Just as for the source rpm, you need to have your kernel sources installed for this technique to work. I have had no problems not to mention fast performance from this board, although the BIOS does have a little overclockability, it doesn’t give much, I think more for stability reasons than anything else.

Uploader: Malamuro
Date Added: 26 October 2011
File Size: 69.45 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 5104
Price: Free* [*Free Regsitration Required]

ASUS A7N8X-X – motherboard – ATX – nForce2 400

This board has two S-Ata connectors to which you can connect 2 SATA devices 1 on each However, is it possible to connect two per connector? Any suggestions, much appreciated. I have the board with the Realtek chip and I just cannot get it to work. As many other features of a PC, this one is very suggestive.

I’ve traced the net looking for someone like me.

A7N8X Deluxe | ASUS Global

When you hook up speakers to the onboard sound card, it will use them for the Speech Reporter but I do not know if it is capable of using speakers hooked up to another sound card for the same functions I doubt it. Do you already have an account? The same advice that goes for the Deluxe version goes for this board: TechSpot is dedicated to computer enthusiasts and power users. Join the community here.


You have to understand that uab CPU isn’t the only component using the memory bandwidth. Make sure to check your USB cables which are often overlooked when a problem occurs. Thx again Ps You dont need the audio turned on in the bios for it to work do you? If your LAN does not support Gigabit speeds, it will not make much of a difference.

Yet no one else seems to have a problem. Linux Installation First you need to download the latest nVidia nForce drivers from nvidia. The nature of SATA is one device per channel. Add your comment to this article You need to be a member to leave a comment.

To start, the price wasn’t quite what I was looking for in terms of cost, but there are many good features this motherboard has implemented in the deluxe version. This table is taken from Hardware.

The dual channel architecture is also implemented, making for 6. These drivers should be installed on-top of a successfull nForce driver install. Your name or email address: In order to get the q7n8x-x performance in Dual-Channel, it is better to have the same amount of memory on borth channels. If you’re still having problems, you a7n8xx-x need a stronger PSU or you can try connecting your devices to an USB hub with its own power supply.


Overall, this board is a great one at the moment, but kind of spendy, as most ASUS boards are. This applies whether the board is running in Dual-Channel or Single-Channel mode. If you have a RedHat based distribution, there are binary RPMs available for download for certain versions of the 2.

I tried pinging it and pinging another computer from it For the nVnet NIC: If you have a different kernel, it is better to download either a source rpm to rebuild it or the drivers sources in tar.

Go into the newly created folder, then type as root make install.

ASUS A7N8X-X + CPU! (Art.10005)

The drivers are included in the nForce Drivers so no extra install necessary. Please help Ps Any thoughts on which is the best lan port to use. Here’s a list of 20. known to have problems with this board: Performance-wise, its a go-getter.

Let’s start with the High-End version of this board.