ASROCK P4DUAL-915GL SATA DRIVER DOWNLOAD

The CPU fits only in one correct orientation. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation. Make sure that the CPU and the heatsink are securely fastened and in good contact with each other. Please connect a CPU fan cable to this connector and match the black wire to the ground pin. Align the card connector with the slot and press firmly until the card is completely seated on the slot.

Uploader: Vudom
Date Added: 13 April 2005
File Size: 70.96 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 13957
Price: Free* [*Free Regsitration Required]

Please check the table on page 12 for proper connection. Installing an expansion card Step 1. Before installing the expansion card, please make sure that the power supply is switched p4dua-l915gl or the power cord is unplugged. Not Installed User Password: In this manual, chapter 1 and 2 contain introduction of the motherboard and step-bystep guide to the hardware installation. Supports up to 2 floppy disk drives Audio: Flexibility Option The default value of this option is [Disabled].

ASRock > DualGL

Serial Port Address Asrock p4dualgl this item to set the address for the onboard serial port or disable it. The discussion area is the place where you get to chat asrock p4dualgl fellow gamers and techies. OnBoard Floppy Controller Use this item to enable p4dual-951gl disable floppy drive controller.

  DXG-308 USB DRIVER

Align the card connector with the slot and press firmly until the card is completely seated on the slot.

ASRock P4Dual-915GL – motherboard – micro ATX – Socket 478 – i915GL

Otherwise, it will operate at single channel mode. No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.

If the jumpers JL1 and JR1 are short, both the front panel and the rear panel audio connectors can work. Can I Run It. Before you install the motherboard, study the configuration of your chassis to ensure that the asrock p4dualgl fits into it. For the user password, you may also clear it.

Parallel Asrock p4dualgl Address Use this item to set the address for the onboard parallel port or disable it. Page 26 This allows you to enjoy the benefits of Surround Display feature.

Although this motherboard offers stepless control, it is not recommended to perform over-clocking. With respect to the contents of this manual, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose. If you install only one memory module or two p4dul-915gl memory modules, it is unable to activate the Dual Channel Memory Technology.

  ACCTON EN1208 PCI ETHERNET DRIVER DOWNLOAD

Parallel Port Satw Use this item to set the operation mode of the parallel port.

Please refer to the instruction of your IDE device vendor for the details. Serial Port Address Use this item to set the address for the onboard serial port or disable it. Self-Monitoring, Analysis, and Reporting Technology feature.

Skip to main content. The CPU fits only in one correct orientation. Remove the bracket facing the slot that you intend to use. Install the SATA hard disks into the drive bays of your chassis.

ASRock P4DualGL – motherboard – micro ATX – Socket – iGL Overview – CNET

If those USB 2. Before you install the motherboard, study the configuration of your chassis to p4sual-915gl that the motherboard fits into it. Up to 5 monitors display capability 4 ports asrock p4dualgl SATA 1.

Page 32 Asroc Port Address Use this asrock p4dualgl to set the address for the onboard parallel port or disable it. The lever clicks on the side tab to indicate that it is locked.

VPN